Even a small amount of laminate is enough to make a necessary and useful thing that takes up a minimum of space, but at the same time becomes a real find. In addition to the laminate, you will need a little board to implement the idea. The result will amaze you with its simplicity and practicality. A compact portable table can be used for games, snacks. It will not be superfluous during outdoor recreation.
Table sizes may vary. First of all, we cut the laminate into strips of the same length, which will need to be joined and additionally glued. We use the remnants of edged boards or beams as a frame. In fact, you need to make a regular frame with grooves from it, but higher.
We insert the laminate into the frame. We additionally glue the joints.
We dissolve a small piece of the board into 4 parts to make the legs. The semicircle basting is easiest to do with a washer or coin of the correct size.
To create curly legs, you need to select excess wood.
Moving on to painting the countertop. We pre-glue the laminate. In our case, the frame will be partially covered with paint. To achieve the desired effect, we run a strip of scotch tape or masking tape around the perimeter, and only after that we apply paint. We do the same with the legs.
Once the paint has dried, just get rid of the tape. We get rid of the protective layer. The table top is ready.
We apply the markings, and then we drill through holes in the legs.
We make mating holes in the frame under the lid on the long sides. Maintain the same distance from the corners.
Then all that remains is to take long bolts with flat heads and add folding legs to the table.
More nuances regarding the manufacture of the original folding table from the remnants of laminate and board, in the video below:
