Those who think incorrectly that the fountain should be a classical structure with a stream of water spilling up or to the side. It turns out that old dishes and unwanted kitchen utensils are perfect for making a fountain or birdbath.
How to do it? First of all, you need to install a solid base block, for example, a barrel to which two pipes are attached: one higher for installing the kettle, and the other lower under the plate. The lower pipe will also serve as a stand for the plate, as well as water from the plate into the barrel will drain along it.
Then a hole is made in the bottom of the metal kettle. Through this hole, the kettle is strung at an angle onto the upper metal pipe.
A metal stand in the form of a small cross is made on top of the lower pipe to support the plate. It remains only to install the workpiece in the barrel, connect the pump for the fountain and fill the barrel with water.
And the fountain turns out to be fantastic, which you can look at endlessly without getting tired.
