Non-standard Use Of Zig-zag Tape

Non-standard Use Of Zig-zag Tape
Non-standard Use Of Zig-zag Tape

Video: Non-standard Use Of Zig-zag Tape

Отличия серверных жестких дисков от десктопных
Video: Singer model 401A vintage zig-zag See Videos sewing machine,accessories,manuals, 2023, February
Anonim

The oversized braid gives the garment an elegant look. This method can be used, for example, to trim the edges of a jacket, decorate the collar and cuffs on a blouse, and on trousers to accentuate the side seams. Before sewing on the braid, place it by holding the iron some distance away. If the tape is washable and is intended for washable fabrics, it should be soaked in hot water for 10 minutes for the same purpose. Dry the tape on a towel, iron it, laying it face down on the towel so as not to deform it. This tape is usually sewn by hand, but a sewing machine can be used for quickness. If the foot hits the tape or does not hold the line, remove it and sew without it.

Image
Image

For a neat finish, it is advisable to position the tape so that the ends are tucked into the seams. When a corner needs to be cut, the flat tape can be bent 45 °. It is better to sheathe the corner with a thick cord braid. Decorative curls from soutache braid can be machine-stitched in the center of the braid. You do not need to guide the soutache webbing with your hands if you feed it through the plastic machine strap attached to the foot, as shown in the photo. Then your hands are free to guide the fabric.

Image
Image

If the fabric does not lie flat, place a cushion on the inside out. How to attach braided tape Glue the braid with special liquid "basting" glue or glue stick. If the tape is made of heavy cord, remove the machine foot. Attach the tape with a suitable thread or a thin nylon single thread, pushing the fabric evenly under the needle. Try to start and end with tape 1.3 cm from the edge of the seams. Fluff up the end of the tape and trim off any excess.

How to sew soutache braid

1) Draw the pattern on the fabric with a pencil or crayon. Place a fixing pad under the patterned fabric, which can then be easily removed.

2) Attach a piece of plastic tape to the special tab on top. Pierce it in the center above the needle hole on the foot. The hole should match the thickness of the tape.

3) Pull the rolled up string through the hole. Insert the foot into place.

4) Sew down the center of the tape with short stitches. Guide the fabric so that the needle follows the pattern. The braid will automatically go to the machine. Remove the gasket. Iron the fabric lightly from the wrong side.

Interesting use of zig-zag tape. Bags, pillows and even dresses are decorated with braid. The connection of two pieces of fabric can be decorated with braid and embroidery.

The cloth of the tablecloth or napkin can be decorated with a wavy lace border:

Image
Image

Children's clothes can also be decorated with wavy braid and embroidery:

Image
Image
Image
Image
Image
Image
Image
Image

Two-Stripe Webbing Coupon:

Image
Image
Image
Image

You can decorate any products with flowers from the remnants of fabric and braid, it will turn out beautifully and unusual. Flowers from wavy braid

Image
Image

To make a flower from braid you will need: - wavy braid of any color.

Image
Image

The length of the braid will depend on the size of the flower you want to make. - a small piece of dense fabric - a needle - threads to match the shade of the braid - scissors - decorative buttons or large beads.

FLOWERS FROM DRAWING, STEP-BY-STEP IMPLEMENTATION:

1. The braid should be folded in an accordion shape.

2. Thread the desired shade of thread into the needle and sew the braid to create a sausage.

Image
Image

3. Take either end and fold in a circle. The end must be well hidden in the center so that it is fixed.

Image
Image

4. Cut off the other end and sew it to the bottom so that it does not get shaggy or frayed.

Image
Image

5. Slightly open the workpiece and straighten the petals.

Image
Image

6. Take a thick fabric and cut a medium-sized circle out of it. Secure it with glue to the workpiece.

Image
Image

7. In the middle of the flower, add a large bead or pretty button.

Image
Image
Image
Image

Popular by topic