Sewing such an unusual accessory - a detachable stand-up collar - is very, very simple with your own hands. Even beginners can handle this project.
YOU WILL NEED:
Small scraps of tissue holding the shape;
Tailor's scissors;
Tailor's pins;
Tailor's chalk;
Thread and sewing needle;
Beautiful buttons
STEP 1
Cut from the fabric two strips 65-75 cm long and 15-20 cm wide. The width of the part is the height of the collar. The length and width of the collar can vary depending on your wishes.
STEP 2
Fold the collar pieces right-side up. Pin or sweep around with tailor's pins.
STEP 3
Stitch the details, leaving a small area open for turning out.
STEP 4
Turn the collar right out. Sew the open area by hand with a blind stitch. Iron.
STEP 5
On one side, mark two loops along the short cut with tailor's chalk.
STEP 6
Sew buttonholes by hand or with a sewing machine.
STEP 7
Sew two buttons on the opposite side along the long cut.
THREE WAYS YOU CAN STILL LOCATE HINGES AND SEW ON BUTTONS FOR REMOVABLE STANDING COLLAR
FIRST METHOD
SECOND METHOD
THIRD METHOD
