How To Remove Carbon Deposits From The Iron? 10 Very Effective Ways

Advice 2023

Table of contents:

How To Remove Carbon Deposits From The Iron? 10 Very Effective Ways
How To Remove Carbon Deposits From The Iron? 10 Very Effective Ways

Video: How To Remove Carbon Deposits From The Iron? 10 Very Effective Ways

Отличия серверных жестких дисков от десктопных
Video: Top Best Chemicals to Remove Carbon BuildUp in your Intake 2023, February
Anonim

No matter how high-quality iron you use, at some point in time you will face the problem of carbon deposits on the iron! A small oversight and the iron cannot be used. However, do not despair! This article will show you how to remove carbon deposits from your iron.

We clean the iron with improvised means

First you need to stock up on everything you need. You will need coarse table salt, a paraffin candle, a soft cloth, hydrogen peroxide, a matchbox, vinegar, soap, baking soda, and nail polish remover. All this can be found in any housewife. So that you can easily and quickly start cleaning the iron from carbon deposits.

Attention! Use all the above methods at your own peril and risk, in some cases you risk ruining your iron, so be careful!

Method 1

Sprinkle some salt on a thick sheet of paper. Heat the iron very strongly and move it over the salt crystals until the carbon deposits come off. For the best effect, add finely ground paraffin from a candle to the salt.

how to clean the iron from carbon deposits
how to clean the iron from carbon deposits

Method 2

Wrap the paraffin candle in a thick cotton cloth. Then wipe off the candles with a hot iron. The candle will melt, so you need to tilt the iron so that the paraffin flows into the prepared pan. It is important not to forget about this, because if the paraffin gets into the holes of the iron, then it can ruin your clothes when ironing. After cleaning, the residues of paraffin and dirt must be removed.

Method 3

Put a handful of salt in cheesecloth and rub the heated iron thoroughly. The carbon deposits will quickly disappear.

Method 4

You can use a matchbox. You need to heat the iron and clean the sole with a strip of sulfur from a box of matches. Better to take a new box so that the sulfur layer is intact.

Method 5

Take a bottle of hydrogen peroxide, moisten a cotton pad in it and wipe the sole of the iron, remove carbon deposits. You can also use a hydroperitic tablet. The tablet should be moved over a very hot iron. Be careful, as an unpleasant odor will be emitted, so it is better to open the vents beforehand. The carbon deposits will peel off and can be easily removed with a damp cloth with residues of hydrorperite.

Method 6

Soak a cotton pad in acetone or vinegar and rub the work surface of the iron. After removing the carbon deposits on the iron, wipe it with a piece of wool. If the carbon deposits have not gone away, then turn off the iron, let it cool slightly and put it overnight on a rag soaked in vinegar. The plaque will soften, peel off and can be removed with a soft cloth.

how to clean the iron from carbon deposits
how to clean the iron from carbon deposits

Method 7

In hardware stores, you can purchase a special pencil for cleaning the iron from carbon deposits. To use it, you need to heat the iron and rub with a pencil. Then wipe the sole with a cloth. If you have chosen a quality pencil, then after cleaning the iron will become like new, smoother and more slippery.

The above methods will help you quickly remove carbon deposits from your iron at home. They are also suitable for cleaning Teflon irons. However, for such delicate and sensitive aggregates, there is another, more gentle way.

how to clean the iron from carbon deposits
how to clean the iron from carbon deposits

Method 8

It is necessary to heat the iron and rub the place of contamination with soap. This method is especially effective for fresh stains.

how to clean the iron from carbon deposits
how to clean the iron from carbon deposits

Method 9

If polyethylene accidentally adheres to the surface of the iron, then this trace can be removed with nail polish remover.

how to clean the iron from carbon deposits
how to clean the iron from carbon deposits

Method 10

You can also use baking soda. You need to mix it with water, moisten a cotton pad in the solution and rub a cold iron in circular movements. Then rinse the surface of the iron with a sponge soaked in clean water and wipe with a soft cloth.

how to clean the iron from carbon deposits
how to clean the iron from carbon deposits

It is important to remember that the iron should never be cleaned with coarse abrasive materials or with a knife. This damages the working surface of the iron and can lead to further problems.

Also, everyone knows that prevention is better than cure. Therefore, after each use of the iron, wipe the soleplate with a soft cloth.

Popular by topic