This is an easy-to-assemble children's table, which I made in the country with my own hands. It is sized to fit a 6 year old or so. But it is quite scalable for adults, which is what I plan to do.
Stage 1: Drawings
Materials and tools
- Board 20x95x2000 mm, 8 pcs
- Self-tapping screws 35x3.8 mm, 75 pcs
- Varnish
- Saw or jigsaw
- Screwdriver
- Bits
- Drill
- Sandpaper or grinder
- Brush
- Rags
We cut the boards
- Plank 790 mm long, 9 pcs - table and bench surface
- Transverse table support, 4 pcs
Table support longitudinal, 2 pieces
Leg, 4 pieces
Bench support, 2 pieces
Here's what happened.
Step 2: Table support
At this stage, we try on the details to each other. Choose a better side and place the “good” side down on something soft. We twist the table support with self-tapping screws.
Stage 3: Table
Align the center board and screw it on with two self-tapping screws on each side. After that, you can screw on the rest. I made a gap between adjacent elements of 5 mm.
Stage 4: Legs
At this stage, we fasten the legs to our children's table. You may need help as the leg is set at an angle. I recommend drilling the holes in advance. Perhaps you should not tighten all the screws at once, try to turn the table over to your feet and level it, after that you can finally tighten the screws.
Stage 5: Bench
We turn the table upside down. To fix the bench support, it will be convenient to use trim boards, as seen in the photo. We fasten 4 screws to each of the legs, I recommend distributing the screws as shown in the photo.
Stage 6: Inferior ligament
In the installation of the lower bundle, trimming boards will again help us. We fix on each side with 2 screws.
Stage 7: Finishing work
After you've secured the seats for our benches, it makes sense to sand everything thoroughly. After that, it makes sense to blow off the dust formed during grinding and cover everything with varnish.
If you want a children's table in the open air in the country to serve you for a long time, you need to varnish it in several layers. In addition, the varnish will protect the table from ketchup stains, etc.
Step 8: Accessories
Everything is ready for tea
In total, the costs were 900 rubles and the manufacture of the table took me a whole day, with the exception of varnishing, I had to wait until the previous layer dries.
One warning: As soon as your child's friends see this children's table, the whole company will spend a lot of time with you.
